1.6cc Miniature Horizontal 4 Stroke Single Cylinder Gas Engine IC Engine Model with Speed Limiter M20

1.6cc Miniature Horizontal 4 Stroke Single Cylinder Gas Engine IC Engine Model with Speed Limiter M20

Features:

.Mini Micro Engine: This is a horizontal Hit and Miss engine with speed limit and wind cooling mechanism, crafted from brass and stainless steel with a wooden base for easy placement and handling.
.Exquisite Workmanship: The excellent desktop model engine comes with exposed gear transmission mechanism for eyecatching charm of the mechanical operation of the engine. It will be appreciated for uniqueness, stability and umcompromising performance.  
.Engine Start Methods:

(1) Check engine circuitry from the wooden base, connect the fuel tank fuel tube, and install 3 AA batteries (4.5V); 

(2) Fill 95# gasoline into the tank. Rotate the flywheel clockwise on the right side of the engine (the surface of the power switch) for several times to make the mixed fuel enter the cylinder. Make sure there is no air in the fuel tube; 

(3) Turn on the power switch, then quickly turn the flywheel clockwise to start the engine on the right side (power switch surface).  
.Precautions:

(1) The machine will not start if the ignition device and the cylinder compression is normal, in that case the carburetor oil needle adjustment is needed; 

(2) After tightening the main oil needle on the carburetor, loosen the 1/4 ring and start the flywheel to make the mixing ratio of gasoline and air normal; 

(3) The power switch should be turned off when the machine stops running.
.Perfect Model Gift:

The historic vintage engine makes a perfect addition for model enthusiasts and collectors for their spare time and excellent personalized gift for mechanical fans for birthdays and Christmas. Suitable for ages 14 and up.

Specifications:

.Material: Brass + Stainless Steel + Wood
.Color: As Shown
.Article Number: M20
.Engine Dimensions: 12 x 8 x 7.5cm
.Engine Weight: 900g
.Package Dimensions: 20 x 20 x 20cm
.Package Weight: 1300g
.Wood Base Size: 15 x 12 x 3cm
.Displacement: 1.6cc
.Bore: 1.3cm
.Stroke: 1.2cm
.Ignition Power Supply Voltage: 3 * AA Batteries(Not Included)
.Start Method: External Force(Electric Drill) or Hand Pulling
.Packing: Box