본문으로 건너뛰기
모든 주문 전 세계 무료 배송
Stirlingkit
ENJOMOR 10cc Whippet Flathead Water-cooled Gasoline Engine - ENJOMOR Engine Models
ENJOMOR
Engine Models 품번: 3333947

ENJOMOR 10cc 위펫 플랫헤드 수냉식 가솔린 엔진

★★★★★
5.00 / 5.0 (인증 리뷰 6개)
₩662,377 USD

기술 요약

ENJOMOR 10cc 위펫 플랫헤드 수냉식 가솔린 엔진은 ENJOMOR가 정밀하게 설계한 10cc 엔진 모델입니다. 금속 가공으로 제작되었으며 가솔린으로 작동합니다. 미화 $499.99에 판매되며, 전 세계 무료 추적 배송, 30일 반품, Stirlingkit의 교체 부품 지원이 제공됩니다.

전 세계 무료 배송
모든 주문에 전 세계 무료 배송이 제공됩니다. 고객에게 별도의 배송비가 청구되지 않습니다.
예상 배송 기간: 영업일 기준 5~14일.
추적 번호는 주문 확인 후 영업일 기준 1~3일 이내에 이메일로 발송됩니다.
수입 관세 및 해당 세금은 포함되어 있지 않으며 고객 부담입니다(DAP).

최소 주문 금액: €350.00. 상품 소계가 €350.00 미만인 주문은 접수되지 않습니다.

이 옵션은 현재 온라인으로 주문할 수 없습니다. 주문하시려면 이메일로 문의해 주세요.

키트 주문 • 전 세계 무료 배송 호환성에 대해 엔지니어에게 문의
✓ 전 세계 무료 배송: 영업일 기준 5~14일 내 추적 가능한 항공 배송.
✓ 누락 부품 보증: 교체 부품을 7일 이내 무료로 발송합니다.
✓ 30일 무위험 반품: 조립하지 않은 원래 상자의 키트는 전액 환불.

기술 사양

검증된 사양 19개
색상 그린
품목 플랫헤드 엔진
제품 형태 완제품(조립 완료)
실린더 수직 단기통
스트로크 4 x 19mm
배기량 10cc
보어 25mm
실사용 RPM 2000-6000
출력 0.5ps
냉각 방식 수랭식
시동 방식 풀 스타트
윤활 독립 윤활
연료 가솔린
재질 금속
제품 치수 11.3 x 11.7 x 11.2cm
제품 무게 1000g
포장 치수 17 x 17 x 17cm
포장 무게 1500g
포장 그래픽 카턴

특징, 구조 및 구성품

HINWEIS:  Dieser Motor wird nicht mehr hergestellt. Sehen Sie sich das neue MUSA FV1A KW-OHV 7-cm³-luftgekühlte OHV-Viertakt-Einzylinder-Benzinmotormodell an. Es ist derzeit zur Vorbestellung erhältlich. Hier klicken


ENJOMOR 10cc Whippet Flathead wassergekühlter Benzinmotor

Verpassen Sie nicht das Blitzangebot. Bitte beachten Sie, dass wir aufgrund des großen Hubraums dieses Motors empfehlen, hochwertige Rcexl-Zündkerzen selbst hier oder im lokalen Modellbaufachgeschäft zu kaufen. Klicken


Merkmale:


.Hommage an den Klassiker: Ausgehend vom von Edgar T. Westbury (ETW) 1963 entworfenen Whippet-Motor als Prototyp und unter Einbeziehung unserer Konstruktionskonzepte haben wir diesen neuen Flachkopfmotor (L-Kopf-Motor) auf den Markt gebracht. Er ist der einfachste Kleinmotor seiner Leistungsklasse und hat sich durch seine hervorragende Leistung breite Anerkennung verschafft.
.Zuverlässige Konstruktion: Die Bauhöhe des Motors wurde auf ein Minimum reduziert. Optisch verleiht dies dem Viertaktmotor ein einzigartig kompaktes Erscheinungsbild. Die seitengesteuerte Ventilanordnung und der einfache Aufbau sorgen für ein leichtes Gewicht. Wasserumlaufkühlung und ein unabhängiges Schmiersystem ermöglichen einen langen Dauerbetrieb ohne Sorgen.
.Hervorragende Qualität: Aus CNC-gefrästem Aluminium gefertigt, ist die integrierte Kurbelwelle gehärtet und die Oberfläche elektrophoretisch lackiert. Die Lackierung verblasst über lange Zeit nicht und zeigt die industrielle Retro-Grünoptik des Motors. Das charakteristische Design von Vergaser und Auspuffrohr sorgt für eine Leistung, die mit der eines OHC/OHV-Motors vergleichbar ist.
.Vielseitige Anwendung: Dies ist ein sehr angenehmer Motor mit großem Tuning-Potenzial, der sich leichter in RC-Modellschiffen im Maßstab einsetzen lässt. Außerdem ist er ein dekorativer Tischmotor und einer der unverzichtbaren Motortypen auf Modellausstellungen.
.Geschenkidee: Ich bin überzeugt, dass Qualität und Leistung Sie für ein interessantes Erlebnis begeistern werden. Er ist eine perfekte Ergänzung für Motormodell-Enthusiasten und Sammler und zugleich ein hervorragendes, persönliches Geschenk für technikbegeisterte Menschen.
.Hinweis: Der Motor wird mit einer Zündkerze geliefert; Zündung und Motorsockel sind nicht enthalten. Bei Fragen kontaktieren Sie uns bitte. Bitte verwenden Sie den Motor gemäß der Bedienungsanleitung, um Schäden durch unsachgemäße Bedienung zu vermeiden. Empfohlenes Alter: ab 14 Jahren.

Technische Daten:

.Farbe: Grün
.Artikel: Flachkopfmotor
.Produktform: Fertigprodukt (montiert)
.Zylinder: senkrecht stehender Einzylinder
.Hub: 4 x 19 mm
.Hubraum: 10cc
.Bohrung: 25 mm
.Praktische Drehzahl: 2000–6000 U/min
.Leistung: 0,5 PS
.Kühlungsart: Wasserkühlung
.Startmethode: Seilzugstart
.Schmierung: unabhängige Schmierung
.Kraftstoff: Benzin
.Material: Metall
.Produktmaße: 11,3 x 11,7 x 11,2 cm
.Produktgewicht: 1000 g
.Verpackungsmaße: 17 x 17 x 17 cm
.Verpackungsgewicht: 1500 g
.Verpackung: Grafikkarton

인증된 빌더 리뷰 (6)

취미가, 기계공, 스케일 모형 엔지니어들의 진짜 후기

5.00 / 5.0
★★★★★ (총 6개)
H. Hahn 인증된 구매자
★★★★★

Enjomor Whippet

The engine is perfectly built and finished, unfortunately I can not test it yet because the defective CDI from Stirlingkit has not yet been delivered. But here already a picture.

Modestino Giusto Jr 인증된 구매자
★★★★★

Awesome Engine

Loving this engine, runs and looks great !!! Being one of the 1st to purchase had a minor issue that was quickly resolved by the company. It should be know that these engine do not spend years in development along with years of testing so minor issues may come up. The 1 specific issue with this engine has been resolved and extremely happy with it - Tino

C. 인증된 구매자
★★★★★

Running on Glow Fuel

I have to say that this engine is lovely. I normally make all of my engines, but this is great and I'm enjoying adding the items around it.

Gavin Gooch 인증된 구매자
★★★★★

Whippet Engine

Very impressed with the detail and quality. Have yet to mount it and fire it up.

J.C. 인증된 구매자
★★★★★

Absolutely •perfect• and then some!

5 Stars to the Enjomor / Stirlingkit 10cc Whippet engine… If I could give it 6 stars, I would! My Whippet arrived quickly via DHL. It was packed securely and safely from Stirlingkit. Wow. Just wow! Another Whippet owner stated: “This is a Whippet that designer Edgar T Westbury would be extremely proud of.” -I couldn’t agree more. The Whippet’s quality, machining, fit and finish are excellent. The green powder-coating on the block is flawless, and no CNC marks can be seen. Stirlingkit & Enjomor have added a lot of extra details that really make it stand out, such as the small brass water inlet & outlet flanges, the velocity stack, small machining details such as the vented oil cap on the ignition side, a clever retaining plate for securing the exhaust, copper carb & exhaust gaskets, & the little brass lever on the throttle & points adjustment are just too cool. Quality hex bolts / hardware are used throughout. I removed the bottom crankcase sump cover, and the Whippet looks just as good on the inside, as the outside. The big-end of the billet connecting rod has a bronze bushing, and has an oil slinger. The camshaft looks to be hardened steel, with brass bushings and drive gears. Everything about this little engine has been thought out and perfectly executed. Copper gaskets are used throughout, and Stirlingkit provides detailed instructions on their website about setup, break-in and running the engine. Looking forward to starting the break-in process and running the little Whippet. I already know it will run perfectly. Couldn’t be happier. Great job, & applause Stirlingkit Team on another beautiful miniature scale engine. 😊👏

Francis Brigando 인증된 구매자
★★★★★

produit conforme à sa description rien à redire moteur super vendeur très sérieux colis ok

관련 Engine Models 키트

전체 컬렉션 보기 →