HM01 base and cdi
This base is extremely well made and suits the engine very well 👏 thanks stirlingkit 🙂
طقم أنابيب زيت خزان الوقود لقاعدة محرك RETROL HM-01 Hit and Miss هو نموذج محرك Hit & Miss مصمم بدقة عالية من قبل RETROL. تتميز بهيكل مصنوع بالتشغيل الآلي من المعدن والخيزران. متوفر بسعر 123.99 دولار أمريكي مع شحن مجاني تتبعه إلى جميع أنحاء العالم، وإرجاع خلال 30 يومًا، ودعم لقطع الغيار البديلة من Stirlingkit.
شحن مجاني لجميع أنحاء العالم
الشحن المجاني إلى جميع أنحاء العالم متاح لجميع الطلبات. لا تُفرض على العملاء أي رسوم شحن منفصلة.
مدة التوصيل المتوقعة: 5–14 يوم عمل.
يُرسل رقم التتبع عبر البريد الإلكتروني خلال 1–3 أيام عمل من تأكيد الطلب.
رسوم الاستيراد الجمركية والضرائب المطبقة غير مشمولة وتقع على عاتق العميل (DAP).
الحد الأدنى لقيمة الطلب: 350.00 €. لا تُقبل الطلبات التي يقل فيها المجموع الفرعي للمنتجات عن 350.00 €.
اطلب الطقم • شحن مجاني لجميع أنحاء العالم اسأل مهندسًا عن التوافق| المادة | معدن + خيزران |
|---|---|
| وزن المنتج | 400 جم |
| وزن العبوة | 500 جم |
| أبعاد العبوة | 20 × 20 × 20 سم |
| التغليف | علبة |
| الأعمار | 16 سنة فأكثر |
آراء حقيقية من الهواة والميكانيكيين ومهندسي المجسمات
This base is extremely well made and suits the engine very well 👏 thanks stirlingkit 🙂
The Base Fuel Tank Oil Pipe Set for RETROL HM-01 Hit and Miss Engine Model is well made and is a good accessory for a working/display HM-01 engine. Glad to have also picked up the CDI ignition starter set.
Nice quality piece. I think these are made of Teak with a red stain. So, very nice touch! I did a little drilling and sanding. Dust smelled like it. So, I used cutting board oil on all the wood. Figured it's going to get oil and fuel sprayed about and this would look well, and it did! The holes for mounting the HM-01 to this cradle were out of square slightly, but all lined up with drilling in the casting. Not horribly noticeable. I put a very slight wipe of silicone under the fuel tank. It moved a bit and kind of skewed the mounting straps. I'm left handed and I hold it from this end when pull starting. All fixed and no movement now. The box could be slightly larger, but it does fit everything I stuffed in there. This is a very nice compliment to the HM-01
I think these are made of Teak with a red stain. So very nice touch! I did a little drilling and sanding. Dust smelled like it. So, I used cutting board oil on all the wood. Figured it's going to get oil and fuel sprayed about and this would look well, and it did! The holes for mounting the HM-01 to this cradle were out of square slightly, but all lined up with drilling in the casting. Not horribly noticeable. I put a very slight wipe of silicone under the fuel tank. It moved a bit and kind of skewed the mounting straps. I'm left handed and I hold it from this end when pull starting. All fixed and no movement now. The box could be slightly larger, but it does fit everything I stuffed in there. This is a very nice compliment to the HM-01
Chamfered Rosewood and brass, tank is glass-ended of heavy construction, box is strongly made